Hey there, how can we help?

Find the answers to your questions.


If you cannot find answer then contact us.

System requirements

< Back

Undet for Revit is a plug-in for Autodesk® Revit® software and can be installed only on Windows PC’s with a preexisting version of Revit® installed.

Operating System: Windows 10 & 11 OS 64-bit. Virtual machines are not supported. 

Supported Revit versions: Revit® 2020-2022 for Windows® 64-bit

Technical requirements: the Minimal technical requirements are the same as for Revit®, but since Undet is dealing with point clouds, which are often heavy and data-rich (millions of points having XYZ coordinates, Intensity and RGB values), some specs are worth upgrading.

RAM: The bigger the point cloud project, the more RAM will be needed. Most users with small-scale point clouds will be fine with 16 GB of RAM. When dealing with tens of gigabytes of scan data, 32 GB of RAM will be welcome. Heavy-duty point cloud professionals utilizing hundreds of gigabytes in a single project will appreciate 64 GB of RAM or more.

Hard Drive: An SSD is far faster than a HDD. LAN will reduce performance considerably if your project is located on a server machine’s drive. Thus, copy your project to the local drive for better performance.

CPU: Multiple threads are not supported. Therefore, you need to pay attention to single-thread performance.

GPU: While your CPU can render graphics, it’ll do so at a much slower rate than a GPU. Thus, we recommend using graphical processors like NVidia or AMD with 3D Graphics accelerator card with OpenGL version 4.4 or newer. For example:
Minimum (slow performance): NVIDIA or AMD GPU with 2GB VRAM.
NVIDIA GeForce GTX 660/Quadro K2000 and newer.
AMD Radeon R9 270/FirePro W5100 and newer.
The latest available drivers.

Recommended(good performance): Discrete Graphics card specifications such as GeForce GTX 1050 Ti 4GB  or above with the latest available drivers.

Software installation

First, you need to create an Undet project with Undet Indexer (Undet project creator), if you don’t have any point cloud data, below you will find several already created Undet demo projects. To open an Undet project with Revit®, please download the Revit® software and Undet plug-in (Undet for Revit®)

1. Download Indexer (project creator): Undet Indexer.exe

2. Download Revit: Revit for Windows

3. Download Undet plug-in: Undet for Revit

4. Download Undet Browser: Undet Browser.exe

Note regarding installation: Undet requires the latest Microsoft Framework, which is a heavy update that might take some time to install. But if your PC is up to date, it should take just a few minutes.

 

Was this article helpful?
How can we improve this content?

Leave a Reply

Your email address will not be published. Required fields are marked *