Hey there, how can we help?

Find the answers to your questions.

If you cannot find answer then contact us.

View modes and coloring modes

You are here:
< Back
Table of Contents

View Preferences and Status Bar

C:\_DARBAI\Failai\Dokumentai\AutoCAD by me\working\view preferences and status bar.pngview preferences and status bar

In the bottom of Undet Project Tab You can see View Preference and Status Bar. Here You can see and change current preview mode, lock or unlock active View Section and change coloring mode by View Section, by Logic Classes or by Data Files.

View Modes

raudona lempute This mode is turned on on either if View Section was not created or Point Cloud Density is less than 100% and View Section was created, but number of points in Active View Section exceeds value, specified in Max. visible Points Count field by project type.
C:\_DARBAI\Failai\Dokumentai\AutoCAD by me\working\geltona lempute.pnggeltona lempute This mode is turned on when Point Cloud Density is set to 100% and View Section was created, but number of points in Active View Section exceeds value, specified in Max. Visible Points Count field by project type.
C:\_DARBAI\Failai\Dokumentai\AutoCAD by me\working\zalia lempute.pngzalia lempute This mode is turned on when View Section was created and number of points in Active View Section does not exceed value, specified in Max. Visible Points Count field by project type.

View Section lock modes

unlocked When View Section is unlocked you can edit it by selecting on the screen and by launching Edit command from View Section Tab -> Edit Panel.
C:\_DARBAI\Failai\Dokumentai\AutoCAD by me\working\locked.pnglocked When View Section is locked you cannot edit it by selecting on the screen, only by launching Edit command from View Section Tab -> Edit Panel.

Coloring modes

coloringas

In Undet You can choose from three coloring modes. You can set coloring to active View Section, to Logic Classes in active View Section or set coloring to Point Cloud Data Files in active View Section.

by viewsection Sets coloring to Active View Section. Active Coloring Option is displaying and can be changed in View Sections List. There are several Coloring Options, that can be used for View Section coloring:

None, By Intensity, By Z, By Plane, Source, Specified colors.

C:\_DARBAI\Failai\Dokumentai\AutoCAD by me\working\by logicclasses.pngby logicclasses Sets coloring to Logic Classes in Active View Section. Active Coloring Option is displaying and can be changed in Logic Classes in Active Section List. There are several Coloring Options, that can be used for Logic Classes coloring:

None, By Intensity, By Z, Source, Specified colors.

C:\_DARBAI\Failai\Dokumentai\AutoCAD by me\working\by datafiles.pngby datafiles Sets coloring to Point Cloud Data Files in Active View Section. Active coloring option is displaying and can be changed in Files in Active Section List. There are several Coloring Options, that can be used for Data Files coloring:

None, By Intensity, By Z, Source, Specified colors.

Was this article helpful?
How can we improve this content?

Leave a Reply

Close Menu